Water Detection
»
WiNG Integration Module - 900 MHz receiver

WiNG Integration Module - 900 MHz receiver

$
865.00
USD
Price per Quantity:
Shipping & Handling: $
5.00
Out of Stock

BMS-WING

The BMS-WiNG leverages RLE’s WiNG wireless sensor technology and allows it to integrate via protocols into any building management system (BMS) or alarm monitoring system.


Pair the BMS-WiNG with RLE’s WiNG wireless sensors to monitor a variety of conditions including temperature, humidity, dew point, and differential pressure, and integrate these sensor readings directly into a BMS or BAS.


Power: Hardwired 24VDC, 500mA or RLE power supply PSWA-DC-24-ST (optional; not included)


Included Equipment: BMS-WiNG, DIN rail mount adapter, USB mini B to USB A cable


Required Accessories: WiNG sensors


Maximum Number of WiNG sensors per BMS-WiNG: 50 sensors


Communications: Available in 868MHz or 900MHz configurations

  • The BMS-WiNG leverages RLE’s WiNG wireless sensor technology and allows it to integrate via protocols into any building management system (BMS) or alarm monitoring system.
  • Pair the BMS-WiNG with RLE’s WiNG wireless sensors to monitor a variety of conditions including temperature, humidity, dew point, and differential pressure, and integrate these sensor readings directly into a BMS or BAS.
  • Power: Hardwired 24VDC, 500mA or RLE power supply PSWA-DC-24-ST (optional; not included)
  • Included Equipment: BMS-WiNG, DIN rail mount adapter, USB mini B to USB A cable
  • Required Accessories: WiNG sensors
  • Maximum Number of WiNG sensors per BMS-WiNG: 50 sensors
  • Communications: Available in 868MHz or 900MHz configurations
  • EIA-232: USB Connector; 115200 Baud, 8 data bits, no parity, 1 stop bit
  • EIA-485: 9600, 19200, 38400 or 76800 baud (selectable); Parity: None, 8 data bits 1 stop bit

Protocols

  • Modbus RTU (EIA-485): Slave RTU mode, supports function codes 03 and 04
  • BACnet MS/TP (EIA-485)
  • External Interface
  • Push Button:Sensor auto-discovery, sensor removal, and factory reset
  • LED Indicators: Power/Status – 1 tricolor
  • DIP Switches: SW 1 – Device configuration; SW 2 – Modbus/Bacnet device ID

Operating Environment

  • Temperature: 32°F to 122°F (0°C to 50°C)
  • Humidity: 5% to 95% RH, non-condensing